What is the operation process of automatic painting equipment?

　　 Now in many companies and enterprises, automatic painting equipment is used for painting work. It has a large working range, high speed and high precision. Automatic painting equipment is a special equipment that automatically covers the surface of metal and non-metal with a protective layer or a decorative layer, and replaces manual labor with intelligent operations. It is also called a spraying robot and automatic painting equipment. The automatic painting equipment is relatively simple to use. So, what is the operation process of the automatic painting equipment? The following editor will introduce you!
　1. The staff uses a forklift to transport the workpiece to the paint transfer platform

　　2. After the forklift is completely withdrawn, the position of the turntable is corrected and the workpiece is sent to the tooling trolley

　　3, the ground chain drags the tooling trolley to run counterclockwise, and transports the workpiece to the robot spraying station

　　4. The robot is spraying at the spraying station, while the staff continues to transport the workpiece to the turntable; after the operation is completed, the forklift leaves the working area and operates the reset button to give the system

　　 The system sends out a signal before the system can continue to run

　　5. Repeat steps 1-4 to know that the ground chain tooling trolley is full of workpieces

　　6. ​​After the workpiece primer is sprayed with Wanheng, the spray gun clears the inner wall of the public pipe part, and the primer is switched to topcoat

　　7. Spray the top coat on the workpiece in sequence

　　 8. Wait for the first workpiece to be sprayed with topcoat to flow to the loading/unloading station, the transfer table is taken out, and the staff is transported to the storage area with a forklift, and a new workpiece is placed at the same time, and the operation is completed

After 　　, the forklift will leave the work area and operate the button to send a signal to the system so that the system can continue to run, and the transfer table will send the new workpiece to the tooling trolley.

　　 9. When the new workpiece is transferred to the painting station, the spray gun cleans the inner wall of the public pipe part, and the top paint is switched to the primer.

　　10, repeat the above steps